Seasol and PowerFeed hose-on containers – How to use them with Melissa King

Seasol and PowerFeed hose-on applications are great, as they are quick and ready to use. Here a few simple steps to set them up:

For the single hose-on packs with a nozzle attached to the container

1. Shake the bottle before use
2. Turn the nozzle toward the area of the garden to be treated or sprayed
3. Lift up the yellow tab (located on the top of the nozzle) at the two side points
4. Connect the hose and turn on the tap – you are now ready to go
5. Stop the flow of water by pressing down the yellow tab on the nozzle or turning off the tap

For the twin pack (two 2-litre containers), the nozzle and straw are separate within the packaging

1. Shake the bottle before use
2. Push the yellow straw firmly into the underside of the green hose nozzle.
3. Take off the cap and screw the nozzle onto the container.
4. Position the container and nozzle in the direction of the garden to be treated or sprayed.
5. Lift up the yellow tab (located on the top of the nozzle) at the two side points
6. Connect the hose and turn on the tap – you are new ready to go.
7. Stop the flow of water by pressing down the yellow tab on the nozzle or turning off the tap