Measure

• Measure the area of garden or lawn that will be treated to work out how much to apply:
  • 700 mL Seasol pouch treats up to 240 m2
  • 700 mL PowerFeed pouch treats up to 200 m2
• Shake pouch well

Connect

• Connect the Click & Grow® trigger to your hose
• Pull off the pouch cap and connect the pouch into the trigger connector.
• You will hear a click once it is secured.
• Set the mix dial to number 3 for Seasol and number 4 for PowerFeed 
• Select your chosen spray nozzle setting

Apply

• Turn on the tap using moderate to high water pressure
• Above the handle on the trigger, switch to ‘ON’ to engage the product
• To spray, squeeze the trigger handle. The product in the pouch will mix with water as it sprays
• Use a sweeping motion, spraying back and forth with slight overlap. Keep pouch upright
• When finished, turn pouch switch to ‘OFF’. Run water through the trigger for 10 seconds to flush any remaining product out
• To release the pouch, press the ‘EJECT’ button on the underside of the trigger
• Run water through the trigger without the pouch for 10 seconds to flush away any remaining product out. Turn pouch switch to ‘OFF’

After use

• If you don’t use all the pouch solution, put the cap back on the pouch and store away for future use. To reuse, follow the directions above

For more great information, also check ouf the FAQ and Tips.